SnSxSe2-x单晶纳米片的可控制备与表征

锡二硫族化合物可以通过改变硫和硒的含量来连续调控三元合金材料的带隙、载流子浓度等物理化学性质,在电子和光电子器件应用上具有巨大的潜力。本文采用化学气相沉积(CVD)技术可控地制备了不同元素组分的SnS_xSe_2-x(x=0,0.2,0.5,0.8,1.0,1.2,1.5,1.8,2.0)单晶纳米片。采用扫描电子显微镜(SEM)、原子力显微镜(AFM)、能量色散X射线光谱(EDS)、透射电子显微镜(TEM)以及拉曼光谱等手段对SnS_xSe_2-x纳米片进行了综合表征。结果表明本方法成功实现了元素百分比可调的SnS_xSe_2-x单晶纳米片的可控制备。重点研究了依赖于元素百分比的SnS_xSe_2-x的拉曼特征谱,实验结果与基于密度泛函理论(DFT)的第一性原理计算得到的SnS_xSe_2-x的拉曼仿真谱高度吻合,理论计算结果较好地诠释了实验拉曼光谱发生变化的原因。本研究提供了一种元素百分比可调的三元SnS_xSe_2-x单晶纳米片的可控制备方法,同时对锡二硫族化合物的明确、无损识别提供了方案。     

Green synthesis and characterization of Tb-Fe-O-Cu ceramic nanocomposite and its application in simultaneous electrochemical sensing of zinc,cadmium and lead

In this work, a green technique for preparing TbFeO₃/CuO was reported by employing Crataegus and Lantana Camara leaves as fuel and alkalizing agents, respectively. The new sensor based on the perovskite-type nanocomposite was employed as a sensitive and selective platform to detect Pb(II), Zn(II) and Cd(II) simultaneously. TbFeO₃/CuO/Carbon paste electrode (CPE) exhibited a large specific surface area and great electrical conductivity, which enhanced electron transport in the electrochemical process considerably. Moreover, square wave anodic stripping voltammetry (SWASV) was used for the investigation of some factors influencing the sensor sensitivity like pH, modifier concentration, as well as accumulation time and potential. Therefore, the low detection limit (LOD) and a wide linear range were obtained at optimum conditions. In this study, a linear range between 0.9 and 110 µg/L for three ions and LOD of 0.48, 0.29 and 0.12 for zinc, cadmium and lead were achieved, respectively. Moreover, TbFeO₃/CuO/CPE was employed to detect zinc, cadmium and lead ions simultaneously in the real samples so that the results have shown consistency with a standard inductively coupled plasma (ICP).     

一种通过梯形PPMgLN波导倍频实现带宽可调谐光源的理论研究

本文设计了一种梯形的周期极化掺镁铌酸锂(PPMgLN)波导,并通过在传播方向上引入温度梯度来拓宽其倍频(SHG)过程的泵浦光源可接收带宽。通过有限差分的光束传输法,计算波导的有效折射率,并进行波导尺寸的设计。结果表明,通过改变梯形波导不同位置的温度,使其形成一个温度梯度,可拓宽泵浦光源的波长可接收带宽。本文所设计的PPMgLN波导最大泵浦光源可接收带宽为C波段,即1 530~1 565 nm,该波导可倍频C波段,得到输出波段带宽为765~782.5 nm,温度调谐范围为30~150 ℃。     

LTNE thermoconvective instability in Newtonian rotating layer under magnetic field utilizing nanoparticles

Journal of Thermal Analysis and Calorimetry - In the present framework, the simultaneous effect of rotation, magnetic field, heat source and local thermal non-equilibrium (LTNE) is investigated on...     

金属衬底在石墨烯化学气相沉积生长中的作用

以过渡金属为催化衬底的化学气相沉积法(Chemical Vapor Deposition，CVD)已经可以制备与机械剥离样品相媲美的石墨烯，是实现石墨烯工业应用的关键技术之一。原子尺度理论研究能够帮助我们深刻理解石墨烯生长机理，为实验现象提供合理的解释，并有可能成为将来实验设计的理论指导。本文从理论计算的角度，总结了各种金属衬底在石墨烯CVD生长过程中的各种作用与相应的机理，包括在催化碳源裂解、降低石墨烯成核密度等，催化加快石墨烯快速生长，修复石墨烯生长过程中产生的缺陷，控制外延生长石墨烯的晶格取向，以及在降温过程中石墨烯褶皱与金属表面台阶束的形成过程等。在本文最后，我们对当前石墨烯生长领域中亟需解决的理论问题进行了深入探讨与展望。     

Electrochemical sensing of H2O2 using cobalt oxide modified TiO2 nanotubes

Cobalt oxide (Co₃O₄) modified anatase titanium dioxide nanotubes (ATNTs) have been investigated for the electrochemical sensing of hydrogen peroxide (H₂O₂). ATNTs have been synthesized by a two-step anodization process. ATNTs were then modified with Co₃O₄ employing chemical bath deposition method. The structure and morphology of ATNTs and their modification with Co₃O₄ has been confirmed by X-ray diffraction by scanning electron microscopy. H₂O₂ sensing has been studied in 0.1 M PBS solution, by cyclic voltammetry and amperometry. Variation in the peak positions and current densities was observed with addition of H₂O₂ for Co₃O₄ modified ATNTs. Sensitivity and limit of detection improved with modification of ATNTs with Co₃O₄ with precursor concentration up to 0.8 M. However, at higher precursor concentrations sensitivity and limit of detection toward H₂O₂ deteriorated. Co₃O₄ Modified ATNTS using 0.8 M precursor concentration are comparatively more suitable for H₂O₂ sensing applications due to the optimum formation of Co₃O₄/ATNTs heterojunctions.     

Development of peptidomimetic hydroxamates as PfA-M1 and PfA-M17 dual inhibitors: Biological evaluation and structural characterization by cocrystallization

Plasmodium parasites causing malaria have developed resistance to most of the antimalarials in use, including the artemisinin-based combinations, which are the last line of defense against malaria. This necessitates the discovery of new targets and the development of novel antimalarials. Plasmodium falciparum alanyl aminopeptidase（PfA-M1） and leucyl aminopeptidase（PfA-M17） belong to the M1 and M17 family of metalloproteases respectively and play critical roles in the asexual erythrocytic stage o...     

Activation energy process in hybrid CNTs and induced magnetic slip flow with heat source/sink

Effect of induced magnetic field is critical as a result of much controlled and focused on liquid flow is wanted in numerous modern and clinical procedures for example electromagnetic casting, drug delivery and cooling of nuclear reactors. Hence this investigation explains the behaviour of hybrid carbon nanotubes (CNTs) flow through slipped surface with induced magnetic field. Accumulation of SWCNTs (single wall) and MWCNTs (multi wall) nanomaterial with water base liquid is considered. Thermal performance is analyzed with regular heat source/sink effect. Chemical reaction and activation energy impacts are incorporated in mass equation. Solution of the similarity equations are obtained by adopting RKF45 method. Influence of flow variables are illustrated through graphs and computational values of drag force, Nusselt number and Sherwood number are presented in tables. It is noted that activation energy enhance the concentration field whereas opposite behaviour for reaction rate. Also induce magnetic field boosted with the larger values of magnetic Prandtl number. Furthermore it is observed that hybrid CNTs nanomaterial having higher rate of heating/cooling compare to singular CNTs nanomaterial.     

Stability analysis of fractional order fuzzy cellular neural networks with leakage delay and time varying delays

In this paper we investigated the stability of fractional order fuzzy cellular neural networks with leakage delay and time varying delays. Based on Lyapunov theory and applying bounded techniques of fractional calculation, sufficient criterion are established to guarantee the stability. Hybrid feedback control is applied to derive the proposed results. Finally, numerical examples with simulation results are given to illustrate the effectiveness of the proposed method.